
Forging ram blowout preventer
> Not only the pipe rams and blind rams but also the variable bore ram and shear rams are available without any structure change.
> It’s easy and convenient on-site to open the bonnets by hydraulic pressure.
> The outlets on the both sides of the body make the operation on site flexible.
> Two kinds of locking system could be chosen:the manual locking system and the automatic hydraulic locking system.
> The pressurized self-sealing sealing mechanism is used between the body and bonnets, so it's not necessary to apply too much pretightening force to secure the reliability of sealing.
> It’s very convenient to lift and transport the BOPs with the four lifting rods.
> The new sealing mechanism of ram shaft secures the sealing reliabillty under the high pressure.
> The ring grooves of flanges are all lined with the corrosion resistant alloy.
| Specification and Parameters | |||
|---|---|---|---|
9”-10000psi Double Ram BOP |
9”-10000psi Single Ram BOP |
||
Bore:9” |
Bore:9" |
||
11”-10000psi Double Ram BOP |
11”-10000psi Single Ram BOP |
||
Bore: 11” |
Bore: 11” |
||
11“-15000psi Single Ram BOP |
11“-15000psi Double Ram BOP |
||
Bore: 11” |
Bore: 11” |
||
13 5/8”-10000psi Double Ram BOP |
13 5/8”-10000psi Single Ram BOP |
||
Bore: 13 5/8” |
Bore: 13 5/8” |
||
13 5/8“-1500psi Single Ram BOP |
13 5/8“-1500psi Double Ram BOP |
||
Bore: 13 5/8” |
Bore: 13 5/8” |
||

EN


