
Casting ram blowout preventer
> Not only the pipe rams and blind rams but also the variable bore ram and shear rams are available without any structure change.
> Matched-manufacturing isn't necessary for the bonnets and body,so the discrepancy could be eliminated by the structure. And it's convenient for the maintenance in the future.
> The outlets on the both sides of the body make the operation on site flexible.
> Three kinds of locking system could be chosen:the internal manual locking system,the outside manual locking system and the automatic hydraulic locking system.
> The pressurized self-sealing sealing mechanism is used between the body and bonnets,so it's not necessary to apply too much pretightening force to secure the reliability of sealing.
> it's very convenient to lift and transport the BOPs with the four lifting rods.
> The new sealing mechanism of ram shaft secures the sealing reliability under the high pressure.
> The ring grooves of flanges are all lined with the corrosion resistant alloy.
| Specification and Parameters | |||
|---|---|---|---|
9” 3000psi Double Ram BOP |
9“-3000psi Single Ram BOP |
||
Bore: 9” |
Bore: 9” |
||
9°-5000psi Double Ram BOP |
9“-5000psi Single Ram BOP |
||
Bore: 9” |
Bore: 9” |
||
9-10000psi Double Ram BOP |
9“-10000psi Single Ram BOP |
||
Bore: 9” |
Bore: 9” |
||
13 11“-3000psi Double Ram BOP |
13 11“-3000psi Single Ram BOP |
||
Bore: 11” |
Bore: 11” |
||
11“-5000psi Double Ram BOP |
11“-5000psi Single Ram BOP |
||
Bore: 11' |
Bore: 11' |
||
11“-10000psi Single Ram BOP |
13 5/8“-3000psi Double Ram BOP |
||
Bore: 11” |
Bore: 13 5/8” |
||
13 5/8'-3000psi Single Ram BOP |
13 5/8“-5000psi Double Ram BOP |
||
Bore: 13 5/8” |
Bore: 13 5/8” |
||
13 5/8“-5000psi Single Ram BOP |
13 5/8“-1000psi Double Ram BOP |
||
Bore: 13 5/8” |
Bore: 135/8” |
||
13 5/8“-10000psi Single Ram BOP |
20 3/4“-3000psi Double Ram BOP |
||
Bore: 13 5/8” |
Bore: 20 3/4” |
||
20 3/4“-3000psi Single Ram BOP |
21 1/4“-2000psi Double Ram BOP |
||
Bore: 20 3/4” |
Bore: 21-1/4” |
||

EN


